Article: Window Etching

Date: Sunday, November 3, 2002

Author: Robert E. Bailey a.k.a.: RbReb13

Provided By: None

Time: Approximately 3 hours

Page: 3 of 3

Using my X-acto knife I trimmed away all the tape that I didn't need for protection. I then used some 220 grit sandpaper and roughed the surface. This way I figured it would catch the light better. I was not disappointed.

Here are the final pictures for this project. I don't have a cold cathode yet, so I used my trouble light with a blue light bulb in it. This case is for a Dual Socket 370 system I am building. When it is done I will have a review and some final pictures. I will update this How-to when that is done. Have fun, I know I did.