Product Name: Black 1/4" Nylon Cable Sleeve

Date: Tuesday, September 7, 2002

Author: Joe Di Figlia

Provided By: FrozenCPU.com

Page: 1 of 1

Introduction:

Looking for another mod? If you are tired of the same old wire loom you see in everyone else's box then you know what I am after here, something different. If you have ever seen the Enermax power supplies, this is the same sleeving used on their Molex lines.

Contents:

The package arrived with the 1/4" Nylon sleeving and 1" per foot of heatshrink tubing. Considering the size of the package, I thought I was receiving something much larger, but then again, this might only be a clue as to how carefully FrozenCPU.com packages their goods. Either that, or they ran out of smaller boxes. As soon as I opened the box, I immediately stuck my fingers in both ends of the sleeving and spent the next 30 minutes trying to get them out. (very much like Chinese Finger Cuffs)

Installation:

Installation is very tricky, I am working on a guide to install as we speak, when finished the link will be posted right --> here. Installing your Nylon Cable Sleeving

Conclusion:

Let me tell you something, After 7 hours + of installing this nylon sleeving; I am very pleased with the results. In fact, I was so please that I went on and covered every inch of cable in my box. On the flipside though, IT TRIED MY PATIENCE. This was no easy task. The how-to is much easier said than done.

Do not try this mod if you have very little patience.

Pros:

- neat cabling

- cheap

- not many people have it

Cons:

- very painstaking